Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Cisco Employee

Definity System 25/75 PRI to CCM Intergration

Has anyone or do you know if you can take a PRI Channel out of the Definity System 25/75 and tie that into let's say a vg200 HDV Pri Port and configure both systems to use each other (Ie: CCM points calls destined for the PBX Phones to the PRI gateway going to the pbx and vice versa)

I found the Pbx intergration sheet on definity g3, but I want to make sure I can do it with the system 25/75 as we have a client that wants to have voip interlaced with his existing pbx system using CCM.

Please advise.

Thanks!

1 REPLY
New Member

Re: Definity System 25/75 PRI to CCM Intergration

I don’t see a problem at a glance. Have you run it by you SE to be sure?

145
Views
0
Helpful
1
Replies