Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Delay for timeslot busy

I have 01 x NM-HDV-2E1-60 and 02 x EM-HDA-4FXO. I connected 8 cellulink in chassis 3745 and I have problem with calls. The problem with timeslot because if I call, the router use two port and not one. So I have calls of 17 hrs. I config Battery-reversal, but I thing that is to problem with chassis 3745... Any have problem with this model ? I have CCM 3.3 (2) and IOS of 3745 is IP VOICE 12.3 (5) GD.

Another question... In dial-peer I have config command preferece (8 port)...

dial-peer voice 9091 pots

preference 1

destination-pattern 909T

port 1/0/4

prefix 9

!

dial-peer voice 9092 pots

preference 2

destination-pattern 909T

port 1/0/5

prefix 9

!

dial-peer voice 9093 pots

preference 3

destination-pattern 909T

port 1/0/6

prefix 9

!

dial-peer voice 9094 pots

preference 4

shutdown

destination-pattern 909T

port 1/0/7

prefix 9

!

dial-peer voice 9095 pots

preference 5

destination-pattern 909T

direct-inward-dial

port 2/0:15

prefix 09

!

dial-peer voice 9096 pots

preference 6

destination-pattern 909T

direct-inward-dial

port 2/1:15

prefix 09

!

dial-peer voice 9097 pots

preference 7

destination-pattern 909T

direct-inward-dial

port 3/0:15

prefix 09

!

dial-peer voice 9098 pots

preference 8

destination-pattern 909T

direct-inward-dial

port 3/1:15

prefix 09

my question is. If only dial-peer voice 9098 pots is free... How many time to delay the call in to cross all dial-peer (1...7) ?

1 REPLY
New Member

Re: Delay for timeslot busy

I think this is a bug. You should check the bug toolkit

79
Views
0
Helpful
1
Replies