I have been experiencing sporadic delays on multiple phones when answering and hanging up calls. The delay happens with both the handset/receiver buttons, the answer/endcallsoftkeys, as well as with Call Attendant. Any info regarding this would be greatly appreciated.
I've seen phones go into slo-mo when the CPU hits 100% such as when using BAT or adding an MOH file. The net effect is similar to what you describe, though everything slows down, like hit the speaker button and wait 2 seconds for dial tone.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...