Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Delay in Connecting Call

Problem with 10- 15 second delay on outgoing calls throug PRI on a 7200 router.

Dial Peer is straight forward.

Destination pattern .......

7 digit dialling.

I have a big suspicion problem is with Call Manager not IOS gateway.

Any Ideas,

Thanks

Pablo

4 REPLIES
Cisco Employee

Re: Delay in Connecting Call

If you dial the outgoing number, followed by the # key - does the call forward without delay?

If so, then you are hitting the interdigit timeout timer. The reason for this is that CallManager still thinks there is a potential match for your dial plan. You can verify this by looking at detailed Cisco CallManager traces.

New Member

Re: Delay in Connecting Call

Yes the call does forward without a delay when the # key is pressed at the end.

I have a route filter on this route pattern.

Route filters have the following clauses.

end of dialing does not exists

area code does not exists

country code does not exits

This still gives delay in dialing 7 digits.

thanks

Cisco Employee

Re: Delay in Connecting Call

You may want to try LOCAL-AREA-CODE DOES-NOT-EXIST AND END-OF-DIALING DOES-NOT-EXIST.

You will find more info regarding dial plans and inter-digit timeout here:

http://www.cisco.com/warp/customer/788/AVVID/call_routing.html

New Member

Re: Delay in Connecting Call

you can put the last digit of your route pattern as #. so whenever a user dials his 7 digit number, he needs to press # to complete the call. this will send the digits immed.

151
Views
5
Helpful
4
Replies