05-14-2008 03:20 AM - edited 03-13-2019 05:15 PM
Hi I need to know how to do the following. Incoming call with number 935205502 must go back out inmediately with number 600461448.
Thank you !
05-19-2008 02:44 AM
Are you testing with csim? If so not it doesn't apply translation-rule so please use a regular call to test.
05-19-2008 03:15 AM
I'm sorry again but I don't know what you mean with csim, sorry !
05-19-2008 03:21 AM
Nevermind. Configure a DP that matches you that number or more.
05-19-2008 03:34 AM
Hello again. I did:
dial-peer voice 30 pots
description "prueba"
incoming called-number 600......
no digit-strip
direct-inward-dial
But I had no luck. It output the same errors.
05-19-2008 03:46 AM
You need "destination-pattern" for outgoing calls.
05-19-2008 04:06 AM
Ok, I did:
dial-peer voice 30 pots
description "test"
destination-pattern 0600461448
port 7/7:D
--------------------------------------
The main config for number translation is:
voice translation-rule 100
rule 1 /935205502/ /0600461448/
!
!
voice translation-profile makechange
translate called 100
---------------------------------------------
And the dump is:
*Nov 8 07:28:21.947: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=, Called Number=0600461448, Voice-Interface=0x66AF1FB8,
Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
*Nov 8 07:28:21.947: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_PORT; Incoming Dial-peer=100
*Nov 8 07:28:21.947: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=, Called Number=0600461448, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_FAX
*Nov 8 07:28:21.947: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=NO_MATCH(-1) After All Match Rules Attempt
*Nov 8 07:28:21.947: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=, Called Number=0600461448, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
*Nov 8 07:28:21.947: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=NO_MATCH(-1) After All Match Rules Attempt
*Nov 8 07:28:24.991: %CALLTRKR-6-CALL_RECORD: ct_hndl=76571, service=None, origin=Originate, category=Modem, DS0 slot/port/ds1/chan=7/2/2/30, called=610769566, calling=outgoing, resource slot/port=(n/a)/(n/a), userid=(n/a), ip=0.0.0.0, account id=(n/a), setup=11/08/2000 07:28:07.654, conn=0.00, phys=0.00, service=0.00, authen=0.00, init-rx/tx b-rate=0/0, rx/tx chars=0/0, time=6.86, disc subsys=ISDN, disc code=0x10, disc text=Normal call clearing, sig type=Unknwn
*Nov 8 07:28:24.991: %CALLTRKR-6-CALL_RECORD: ct_hndl=76572, service=None, origin=Answer, category=SyncData, DS0 slot/port/ds1/chan=7/0/0/0, called=935205502, calling=(n/a), resource slot/port=(n/a)/(n/a), userid=(n/a), ip=0.0.0.0, account id=76587, setup=11/08/2000 07:28:22.534, conn=0.00, phys=0.00, service=0.00, authen=0.00, init-rx/tx b-rate=0/0, rx/tx chars=0/0, time=0.01, disc subsys=CSM, disc code=0x1A, disc text=Failed to find DSP resource, sig type=Unknwn
05-19-2008 04:13 AM
Is said DP up/up? That is the correct port ?
Noe you also need "no digit-strip" for DP 30.
05-19-2008 04:29 AM
That port works because it was already configured and this is a production router. I added no digit-strip but still not working.
05-19-2008 06:06 AM
Yes for some reason DP is not matched.
Try "sh dialplan number
05-19-2008 06:14 AM
Thanks, this is the dump:
2821_VPNServer#sh dialplan number 600461448
Macro Exp.: 5600461448
No match, result=-1
05-19-2008 07:50 AM
Dialpeer is either misconfigured or down for some reason.
05-19-2008 08:10 AM
Could a dialpeer be down like an interface ?
I need to make this run . . . if misconfigured, could somebody please help ? Thanks.
05-19-2008 08:21 AM
Could a dialpeer be down like an interface ?
I need to make this run . . . if misconfigured, could somebody please help ? Thanks.
05-19-2008 12:55 PM
Check:
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010e6d1.shtml
I think more than one person on these forum can give professional support if so requested.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: