Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Dial peer howto

Hi I need to know how to do the following. Incoming call with number 935205502 must go back out inmediately with number 600461448.

Thank you !

28 REPLIES
Hall of Fame Super Gold

Re: Dial peer howto

Do you have CM or CME? If so the easier thing thing is to set CFA on a DN.

New Member

Re: Dial peer howto

I'm sorry but I can't understand none of your short words here. Thanks.

Hall of Fame Super Gold

Re: Dial peer howto

Communication Manager, Communications Manager Express. Do you have any of that or what do you have ?

New Member

Re: Dial peer howto

No, I'm using dial peers on the IOS straight.

Hall of Fame Super Gold

Re: Dial peer howto

voice translation-profile makechange

translate called 100

voice translation-rule 100

rule 1 /12345678/ /87654321/

voice-port x/y

translation-profile incoming makechange

DP config as normal.

New Member

Re: Dial peer howto

that helped me a bit more. What you mean with DP ? Thanks.

Hall of Fame Super Gold

Re: Dial peer howto

Dial Peer.

New Member

Re: Dial peer howto

Should I configure a dialpeer after that configuration to make it work ? Or that's just another kind of dialpeer ?

Hall of Fame Super Gold

Re: Dial peer howto

You should have already dial peer configured if the router was working someway.

New Member

Re: Dial peer howto

Hi, I'm calling after doing what you said but it's not working, something to say ?

Hall of Fame Super Gold

Re: Dial peer howto

"debug isdn q931" and if necessary "debug voip dialpeer". "term mon" as always when taking debugs.

New Member

Re: Dial peer howto

Anytime I'm troubleshooting PRI's, I'll use a program from download.com, the PRI debugger. just go there and search for e1 or t1. Very useful to have one place (that's not scrolling) to see the call info on a PRI

New Member

Re: Dial peer howto

Nice to know, will check it out, thank you !

New Member

Re: Dial peer howto

Hello ! I have found that the number translation works, but it seems that the outgoing number does not match with any of my outgoing dialpeers. Can somebody explain what happens ? I'm posting a text with the error dump.

Thanks !

Hall of Fame Super Gold

Re: Dial peer howto

Are you testing with csim? If so not it doesn't apply translation-rule so please use a regular call to test.

New Member

Re: Dial peer howto

I'm sorry again but I don't know what you mean with csim, sorry !

Hall of Fame Super Gold

Re: Dial peer howto

Nevermind. Configure a DP that matches you that number or more.

New Member

Re: Dial peer howto

Hello again. I did:

dial-peer voice 30 pots

description "prueba"

incoming called-number 600......

no digit-strip

direct-inward-dial

But I had no luck. It output the same errors.

Hall of Fame Super Gold

Re: Dial peer howto

You need "destination-pattern" for outgoing calls.

New Member

Re: Dial peer howto

Ok, I did:

dial-peer voice 30 pots

description "test"

destination-pattern 0600461448

port 7/7:D

--------------------------------------

The main config for number translation is:

voice translation-rule 100

rule 1 /935205502/ /0600461448/

!

!

voice translation-profile makechange

translate called 100

---------------------------------------------

And the dump is:

*Nov 8 07:28:21.947: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Calling Number=, Called Number=0600461448, Voice-Interface=0x66AF1FB8,

Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_SPEECH

*Nov 8 07:28:21.947: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=Success(0) after DP_MATCH_PORT; Incoming Dial-peer=100

*Nov 8 07:28:21.947: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Calling Number=, Called Number=0600461448, Voice-Interface=0x0,

Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_FAX

*Nov 8 07:28:21.947: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=NO_MATCH(-1) After All Match Rules Attempt

*Nov 8 07:28:21.947: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Calling Number=, Called Number=0600461448, Voice-Interface=0x0,

Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_SPEECH

*Nov 8 07:28:21.947: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=NO_MATCH(-1) After All Match Rules Attempt

*Nov 8 07:28:24.991: %CALLTRKR-6-CALL_RECORD: ct_hndl=76571, service=None, origin=Originate, category=Modem, DS0 slot/port/ds1/chan=7/2/2/30, called=610769566, calling=outgoing, resource slot/port=(n/a)/(n/a), userid=(n/a), ip=0.0.0.0, account id=(n/a), setup=11/08/2000 07:28:07.654, conn=0.00, phys=0.00, service=0.00, authen=0.00, init-rx/tx b-rate=0/0, rx/tx chars=0/0, time=6.86, disc subsys=ISDN, disc code=0x10, disc text=Normal call clearing, sig type=Unknwn

*Nov 8 07:28:24.991: %CALLTRKR-6-CALL_RECORD: ct_hndl=76572, service=None, origin=Answer, category=SyncData, DS0 slot/port/ds1/chan=7/0/0/0, called=935205502, calling=(n/a), resource slot/port=(n/a)/(n/a), userid=(n/a), ip=0.0.0.0, account id=76587, setup=11/08/2000 07:28:22.534, conn=0.00, phys=0.00, service=0.00, authen=0.00, init-rx/tx b-rate=0/0, rx/tx chars=0/0, time=0.01, disc subsys=CSM, disc code=0x1A, disc text=Failed to find DSP resource, sig type=Unknwn

Hall of Fame Super Gold

Re: Dial peer howto

Is said DP up/up? That is the correct port ?

Noe you also need "no digit-strip" for DP 30.

New Member

Re: Dial peer howto

That port works because it was already configured and this is a production router. I added no digit-strip but still not working.

Hall of Fame Super Gold

Re: Dial peer howto

Yes for some reason DP is not matched.

Try "sh dialplan number .

New Member

Re: Dial peer howto

Thanks, this is the dump:

2821_VPNServer#sh dialplan number 600461448

Macro Exp.: 5600461448

No match, result=-1

Hall of Fame Super Gold

Re: Dial peer howto

Dialpeer is either misconfigured or down for some reason.

New Member

Re: Dial peer howto

Could a dialpeer be down like an interface ?

I need to make this run . . . if misconfigured, could somebody please help ? Thanks.

New Member

Re: Dial peer howto

Could a dialpeer be down like an interface ?

I need to make this run . . . if misconfigured, could somebody please help ? Thanks.

Hall of Fame Super Gold

Re: Dial peer howto

Check:

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010e6d1.shtml

I think more than one person on these forum can give professional support if so requested.

298
Views
4
Helpful
28
Replies