Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Dial plan procedure

Hi, we have a Cisco 3845 Router. What is the commands to assign an Ephone-dn 1 (Ephone 2) to a specific telephone number 4410341 (Port 1/0/8). The following is a latest configuration. Thank you and waiting for assistance.

dial-peer voice 100 pots

numbering-type unknown

destination-pattern 05........

no digit-strip

port 3/0/0

!

ephone-dn 1

number 1000

label Secretary General

description 1000

name Secretary General

hold-alert 30 originator

!

ephone 2

device-security-mode none

mac-address 001D.A21A.046C

button 1:1

!

1 REPLY

Re: Dial plan procedure

Do you want incoming calls on port 1/0/8 to go to ephone-dn 1? If so, enter the following commands:

voice-port 1/0/8

connection plar 1000

Or, do you want outbound calls from ephone-dn 1 to always use port 1/0/8? If so, take a look at the following link.

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml

Hope this helps. If so, please rate the post.

Brandon

92
Views
4
Helpful
1
Replies
CreatePlease login to create content