Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Dialout using an ata

I want to know if its possible that i can connect ata phone line with my laptop modem and connect my isp? Actually i have to test a point of sale machine and see if it can connect to the bank network.

6 REPLIES

Re: Dialout using an ata

It is definetely possible. You may need to configure modem passthrough or modem relay on your gateway.

Brandon

Re: Dialout using an ata

Modem passthrough is already configured, i am successfully able to send and recieve fax through this ATA.

Re: Dialout using an ata

So you can send fax, but not modem transmissions? If so, try to lower the maximum port speed for your modem.

Brandon

Re: Dialout using an ata

I tried that already, it's not working like that. Any one ever tried to do any such thing?

New Member

Re: Dialout using an ata

Hi,

it will never work because the ATA does not support modem pass-through.

You can confirm on that link:

http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_qanda_item09186a00800946e1.shtml

Carlos Almeida

New Member

Re: Dialout using an ata

We once did the followin config..

Modem---ATA----CCM----GWY (MGCP)----PSTN---RAS

ATA configured as SCCP client.

I will try to find the commands we used, but I remember that we had to enable modem pass-trough on the gateway.

125
Views
0
Helpful
6
Replies
CreatePlease login to create content