DID Auto Fax routing with the Cisco Call Manager and faxpress fax server
Currently I have a Cisco Call Manager 3.3(3)sr4 using 8 vg248 fxs ports connected to a castelle fax press 5000 server. On those 8 ports I have our main fax number coming in on line one and forwarding the call to the next number if busy or no answer. That works fine, but I would like to do is add did auto fax routing to the fax server. I am told by Castelle support that if the pbx system is capable of doing DID to DTMF conversion the
output string should be compatible with faxpress. I have a sample config doc from castelle that shows using a 3725 router, a 4 port internal fxs card and utilizing dial peers to forward the calls to the fax server. Can I use the vg248 to do it instead? Or can someone tell me the best way I can add DID Auto Fax routing with the Cisco Call Manager and the Castelle fax press 5000 server using the vg248?
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.