Hi, trying to get direct access from pstn to internal extensions I used translation rules applied to dial-peers.
The problem is that with this configuration just one incoming call can be received at a time.
the following config is the one that I've tested, our 2821 router is connected to 4 isdn bri that have the public numbers routed and are in a jump group created by the telco, cme is ver 3.3.
Does anyone know which could be the problem?
Does anyone have a real working exemple?
thanks a lot.
greetings for that forum
configuration:
voice translation-rule 1
rule 1 /902321400/ /2000/
rule 2 /932183737/ /2000/
rule 3 /933683011/ /2100/
rule 8 /932388298/ /2800/
rule 9 /932388299/ /2101/
rule 10 /932388300/ /2301/
rule 11 /932388296/ /2500/
rule 12 /932388297/ /2601/
rule 13 /933683014/ /2701/
rule 14 /902116855/ /2702/
rule 15 /933683010/ /2703/
!
!
voice translation-profile als_2xxx
translate called 1
!
voice-port 0/0/0
compand-type a-law
cptone ES
connection plar 2000
!
voice-port 0/0/1
compand-type a-law
cptone ES
connection plar 2001
!
voice-port 0/1/0
compand-type a-law
cptone ES
connection plar 2002
!
voice-port 0/1/1
compand-type a-law
cptone ES
connection plar 2003
voice-port 0/0/0
compand-type a-law
cptone ES
!
voice-port 0/0/1
compand-type a-law
cptone ES
!
voice-port 0/1/0
compand-type a-law
cptone ES
!
voice-port 0/1/1
compand-type a-law
cptone ES
!
dial-peer voice 1 pots
translation-profile incoming als_2xxx
destination-pattern 0T
incoming called-number .
direct-inward-dial
port 0/0/0
dial-peer voice 2 pots
translation-profile incoming als_2xxx
preference 2
destination-pattern 0T
incoming called-number .
direct-inward-dial
port 0/0/1
!
dial-peer voice 3 pots
translation-profile incoming als_2xxx
preference 3
destination-pattern 0T
incoming called-number .
direct-inward-dial
port 0/1/0
!
dial-peer voice 4 pots
translation-profile incoming als_2xxx
preference 4
destination-pattern 0T
incoming called-number .
direct-inward-dial
port 0/1/1
