cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
202
Views
5
Helpful
1
Replies

Digit strip in 12.4XC4

paolo bevilacqua
Hall of Fame
Hall of Fame

[pls excuse duplicate post]

I thought that the main usage of digit strip was to remove the matched pattern for an outbound pots call.

I run 12.4.XC4 with CCME 4.0(3), digit strip on a destination pattern of ^0T is not removing the 0 and passes the dialed number unchanged to a BRI voice port.

I had to use a translation rule to remove the leading 0.

Did I misunderstood the usage? How can check that digit strip is working or not when dialing out ? Calls are made from skinny phones.

1 Reply 1

msolak
Level 4
Level 4

hi,

why you are using ^0T as destination pattern?

try it with 0T and the 0 will be stripped.

you needn't use any translation pattern to strip the leading 0.

regards

mehmet

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: