Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DISA and Call Manager

Is Dial-in System Access mobility service available on Call AMnager 3.x or 4.x.

If so, how can it be disable for a DN or phone?

Thx

1 REPLY
VIP Super Bronze

Re: DISA and Call Manager

Cisco calls DISA "Mobile Voice Access." In CCM 3.x and 4.x it required a separate Mobility product and server.

In current versions of UC Manager, this feature is built in and only requires a VoiceXML-capable gateway running H.323 or SIP. This can be your existing voice gateway as long as you have sized it correct and are using H.323 or SIP for signaling. MGCP will not work as it does not support voice applications.

http://cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmfeat/fsmobmgr.html#wp1203108

MVA is explicitly enabled on a per-End User basis.

Please remember to rate helpful responses and identify helpful or
362
Views
0
Helpful
1
Replies