Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

disconnect time

Dear Experts,

Can I increase time between digits (disconnect time) .

That will be if dialing any external number (PSTN Number) such as 00962777556669 and I stop dial the digits after 7 digits (dial 009627 and stop) so I will get a disconnect message. So how I can increase this time??

Thanks

4 REPLIES
Hall of Fame Super Gold

Re: disconnect time

Thais is called interdigit timeout. Which system do you have exactly ?

New Member

Re: disconnect time

Hi,

No i didn't mean the interdigit timeout( T302).

i need the disconnect time.

look if i dialed 5 digits of any external number 0XXXXXXXXXXXXXX,then wait for 6 second i will get voice message telling me that number error.

thats i need , to change this time ....

can help me ?

New Member

Re: disconnect time

we have CCM5-Version: 5.1.2.1000-11

Hall of Fame Super Red

Re: disconnect time

Hi Islam,

I'm going to have to go with my friend Paolo on this one (no surprise :) I think you and I were working on this recently and tweaked the T302 Timer to alleviate a Number Plan overlap. But this is also the Timer at play in this scenario;

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cc0072c/0#selected_message

In order to allow sufficient time for a user to dial a telephone number, Cisco CallManager relies on a timer referred to as the interdigit timeout. This parameter indicates the duration Cisco CallManager waits after each digit is entered before it assumes the user has finished entering digits.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml

Hope this helps!

Rob

110
Views
0
Helpful
4
Replies