Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Does Anyone have an Example H323 Gateway Config for E-1 PRI US to Israel?

We are going to ship a 2650 router with Srst to Israel and try to set it up as an H323 Gateway using E1 PRI off the Call Manager in NJ. If anyone has any config close to this it would be appreciated.

4 REPLIES
New Member

Re: Does Anyone have an Example H323 Gateway Config for E-1 PRI

what do you want to configure? here are some commands for h323 gateway working in Israel:

isdn switch-type primary-qsig/primery-net5

controller E1 1/0

pri-group timeslots 1-31

interface Serial1/0:15

description "D Channel 0"

no ip address

isdn switch-type primary-qsig

isdn incoming-voice modem

call-manager-fallback

ip source-address 10.2.1.1 port 2000

max-ephones 30

max-dn 40

dialplan-pattern 1 882.... extension-length 4

access-code fxo 9

voicemail 8501

Hope it will help you,if you'll need more help just let me know.

New Member

Re: Does Anyone have an Example H323 Gateway Config for E-1 PRI

I am looking especially for Line Coding and Framing. Thanks for the Help :)

New Member

Re: Does Anyone have an Example H323 Gateway Config for E-1 PRI

E1 1/0 is up.

Applique type is Channelized E1 - balanced

No alarms detected.

alarm-trigger is not set

Version info Firmware: 20000504, FPGA: 8

*************************************************

Framing is CRC4, Line Code is HDB3, Clock Source is Line.

*************************************************

New Member

Re: Does Anyone have an Example H323 Gateway Config for E-1 PRI

Thanks for all your help :)

160
Views
0
Helpful
4
Replies
CreatePlease login to create content