Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

DPA 7630/7610

I am using a DPA7630 to intergrate my Octel 350 aria with my CCM cluster. It works great , but because the 350 uses 12 port line cards and the DPA uses 8 ports I am loosing 4 ports per card. My question is can you hook up the DPA 7610 to a stand alone Octel 350 or is that for Nortel only.

1 REPLY
Silver

Re: DPA 7630/7610

Using the DPA 7630/7610, you can integrate the following systems:

*Cisco CallManager 3.0(1) or higher

*Octel 200 and 300 voice messaging systems (using APIC/NPIC integration)

*Octel 250 and 350 voice messaging systems (using FLT-A/FLT-N integration)

*Lucent Definity G3 PBX systems (DPA 7630 only)

*Nortel Meridian 1 PBX systems (DPA 7610 only)

The DPA 7630/7610 functions as a gateway between the Octel, PBX systems, and Cisco CallManager.

The DPA 7610 only supports integration to the following voice mail systems:

*Avaya G3V3 and above

*Octel 200 and 300

*Octel 250 and 350

The following URLs are very useful:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_access/7630adpt/index.htm

http://www.cisco.com/warp/public/cc/pd/ga/prodlit/7630_ds.htm

113
Views
0
Helpful
1
Replies