Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

DSP Error When conferenceing

Hi,

I am intermitently getting a "DSP Error" on my ip phones when conferencing. This is what the detailed trace looks like:

01/16/2004 15:42:13.873 CCM|Locations_adjustBandwidth -- cdccPID=(2.14.13980) Orig=Dest=1 no entry for cdcc. No need to adjust.|<CLID::StandAloneCluster><NID::172.30.110.32>

01/16/2004 15:42:13.873 CCM|StationInit: 000002169 OpenReceiveChannelAck Status=0, IpAddr=0x3c761eac, Port=29378, PartyID=33614450|<CLID::StandAloneCluster><NID::172.30.110.32><CT::2,100,90,1.6120709><IP::172.30.118.60><DEV::SEP000E3833968A>

01/16/2004 15:42:13.873 CCM|MediaManager - wait_AuConnectInfo|<CLID::StandAloneCluster><NID::172.30.110.32><CT::2,100,90,1.6120709><IP::172.30.118.60><DEV::SEP000E3833968A>

01/16/2004 15:42:13.873 CCM|MediaManager - wait_AuConnectInfo - recieved response, fowarding|<CLID::StandAloneCluster><NID::172.30.110.32><CT::2,100,90,1.6120709><IP::172.30.118.60><DEV::SEP000E3833968A>

01/16/2004 15:42:13.873 CCM|MediaCoordinator - wait_AuConnectInfoInd|<CLID::StandAloneCluster><NID::172.30.110.32><CT::2,100,90,1.6120709><IP::172.30.118.60><DEV::SEP000E3833968A>

01/16/2004 15:42:13.873 CCM|UnicastBridgeControl - stationOutputStartMediaTransmission tcpHandle=0x4f6 myIP: 206e1eac (172.30.110.32)|<CLID::StandAloneCluster><NID::172.30.110.32><CT::2,100,90,1.6120709><IP::172.30.118.60><DEV::SEP000E3833968A>

01/16/2004 15:42:13.873 CCM|UnicastBridgeControl - star_StationOutputStartMediaTransmission - ConferenceID: 200003f MediaPartyId: 200eaa1, RemoteIpAddr: 3c761eac (172.30.118.60) RemoteRtpPortNumber: 72C2 msecPacketSize: 20 compressionType: 4, tcpHandle=0x4f6|<CLID::StandAloneCluster><NID::172.30.110.32><CT::2,100,90,1.6120709><IP::172.30.118.60><DEV::SEP000E3833968A>

01/16/2004 15:42:13.873 CCM|Locations_adjustBandwidth -- cdccPID=(2.14.13979) Orig=Dest=1 no entry for cdcc. No need to adjust.|<CLID::StandAloneCluster><NID::172.30.110.32>

01/16/2004 15:42:13.888 CCM|StationInit: 000002173 Alarm alarmSeverity=7 text="29: DSP Error [0x4, 0x10, 0x0, 0x0](5) 1" parm1=1(1) parm2=896933548(35761eac).|<CLID::StandAloneCluster><NID::172.30.110.32><CT::2,100,90,1.6120710><IP::172.30.118.53><DEV::SEP000E386DD41C>

01/16/2004 15:42:14.263 CCM|StationInit - InboundStim - KeepAliveMessage - Send KeepAlive to Device Controller. DeviceName=SEP999999991605, TCPHandle=000001246, IPAddr=172.30.110.34, Port=4199, Device Controller=[2,89,1063]|<CLID::StandAloneCluster><NID::172.30.110.32><CT::2,100,90,1.6120711><IP::172.30.110.34><DEV::SEP999999991605>

01/16/2004 15:42:14.498 CCM|CMProcMon - calculateAverageExpectedDelay - AverageDelay=0|<CLID::StandAloneCluster><NID::172.30.110.32>

01/16/2004 15:42:14.545 CCM|StationInit - InboundStim - KeepAliveMessage - Send KeepAlive to Device Controller. DeviceName=SEP000E38678E0F, TCPHandle=000001403, IPAddr=172.30.119.29, Port=50349, Device Controller=[2,89,1176]|<CLID::StandAloneCluster><NID::172.30.110.32><CT::2,100,90,1.6120712><IP::172.30.119.29><DEV::SEP000E38678E0F>

01/16/2004 15:42:14.826 CCM|StationInit - InboundStim - KeepAliveMessage - Send KeepAlive to Device Controller. DeviceName=SEP000DEDE1D869, TCPHandle=000002202, IPAddr=172.30.119.23, Port=51597, Device Controller=[2,89,1552]|<CLID::StandAloneCluster><NID::172.30.110.32><CT::2,100,90,1.6120713><IP::172.30.119.23><DEV::SEP000DEDE1D869>

01/16/2004 15:42:14.904 CCM|CMProcMon - ------Entered Router Verification|<CLID::StandAloneCluster><NID::172.30.110.32>

01/16/2004 15:42:14.904 CCM|CMProcMon - ----Exited Router Verification|<CLID::StandAloneCluster><NID::172.30.110.32>

Has anyone every seen this before?

Thanks

Frank

1 REPLY
Cisco Employee

Re: DSP Error When conferenceing

Looks like Bug ID CSCec16991

Fixed in Phone load P00305003001

115
Views
0
Helpful
1
Replies
CreatePlease to create content