DSP PVDM2-64 config on Cisco 2821 router

[k.ms]

Hi,

I Have Cisco 2821 router with PVDM2-64 module.I have registered the PVDM2-64 module with CCM 4.1(3) for conferencing & transcoding.

I am not able to increase the transcoding "maximum sessions" on the dspfarm profile.I have tried reducing the max conference session from 5 to 3.But still the max transcoding session in dspfarm profile for transcoding shows 16.

I have tried shut & no shut of transcode & conference profile.

Let me know if any one has faced this problem.

Regds

KMS

[jolo07310]

I have 2811 with PVDM2-32 with c2800nm-ipvoice-mz.123-14.T4.bin.

I have no problem with add or reduce max session command.

If I understand correctly, PVDM2-64 has 4 DSP.

Each DSP supports 4 max session transcoder OR 2 max session conference.

for instance, you configure 1 DSP for 4 transcoder session, then you will have 3 DSP for 6 conference session.

Thanks