Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DTMF relay CCM 5.1 SIP Trunk

We are running CCM 5.1 and have a SIP trunk configured in the Call Manager. Calls are routing fine but DTMF relay is not working. I have worked with the carrier and we have tried many variances in the configuration with no luck.

The carrier has commented that they have many SIP truncks that terminate with CCM 4.x but that they have had many issues with CCM 5.1

Many of our discussions have centered around the implementation of the Media Termination Point.

Anyone have any experience resolving this type of issue in CCM 5.1?

Thanks,

Brian

1 REPLY
Bronze

Re: DTMF relay CCM 5.1 SIP Trunk

As I understand it, we should be able to get DTMF inband (RFC2833) working between an MGCP gateway and a SIP trunk without the use of an MTP with CCM 5.x.

160
Views
0
Helpful
1
Replies