Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Dual Switch Integration.....with a difference

Hi all,

I have another question for you. Is it possible to have a dual switch integration with CCM and an Ericcson MD110?

What we plan to do is have Unity attached to the CCM and CCM integrated with the Ericsson?

Thanks

Andy

1 REPLY
Cisco Employee

Re: Dual Switch Integration.....with a difference

If you do it this way then the burden of providing proper integration between the Ericsson and Unity will lie on the CCM and your choice of gateway. I've seen this done with mixed results and from the Unity point of view there's not much we can do to support it.

I would instead recommend using Unity’s standard dual switch topology as shown in the integration guides, e.g. Unity uses the Skinny tsp to connect to CCM via IP and the Dialogic tsp to connect to the Ericsson via analog lines. Here’s the link for the Ericsson…

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/unity31/integuid/ericseri/erics312/index.htm

93
Views
0
Helpful
1
Replies
CreatePlease to create content