cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
644
Views
0
Helpful
1
Replies

E&M pinouts

mbserrano
Level 1
Level 1

I have an Ericsson MD-110 pbx with E&M cards and I want to connect it to my router with E&M cards too, can anyone help me with the pinouts for the cable needed.

also what type of signalling is best for this setup?

thanks

Marlon

1 Reply 1

fbahram
Level 1
Level 1

This is the info we have on Ericsson:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/sw_conf/pbx_int/ericsson.htm

The pinouts for Ericsson are not necessarily the same as those for Cisco. We can provide the Cisco pinouts but the particular Ericsson pinouts should be provided by them. Here are the options you have for E&M signaling and all the pinouts depending on which model you choose to follow:

http://www.cisco.com/warp/customer/788/signalling/21.html

http://www.cisco.com/warp/customer/788/signalling/e_m_overview.html

http://www.cisco.com/warp/customer/788/signalling/analog_em_ts.html

Hope this helps.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: