We would like to gather all the E1 parameters in order to add it as a MGCP gateway in CCMAdmin.
MGCP config in CCM
GW Type : cisco3845
Global ISDN Switch Type : EURO
Switchback Timing : Selection of Immediate/Delayed/Graceful/Scheduled (The parameter shown in Product Specific Configuration when we added gateway as a MGCP type in CCMAdmin. In Japan, we all use "Graceful" for voice PRI circuit)
PRI protocal type : Selection of PRI 4ES/PRI 5E8/PRI 5E8 TELEOS/PRI 5E8 INTECOME/PRI 5E9/PRI DMS-100/PRI DMS-250/PRI NI2/PRI 5E8 CUSTOM/PRI ETSISC/PRI NTT/PRI QSIG T1 (will try PRI ETSISC)
PCM type : a-law
Line coding : NO-CRC4
Framing : AMI
Clock : Selection of Internal/Free-Running/External/External Primary (We were told the Clock is Line, thus will try External)
London is using COLT for E1 voice circut and have checked the Global ISDN Switch Type is primary-net5 in 3845 but can't find the exact match in CCMAdmin. Will try EURO.
Switching Timing is the parameter located below "Global ISDN Switch Type" in CCMAdin. Currently we are using Graceful in all japan T1 connections. Just want to know what exactly is using in UK? Thanks.
These are the paths to get to each CCX logs through CLI. They may be helpful if you are having issues accessing RTMT or downloading logs through it.
If you want to download them you have to prefix "file get " and you can add one of the options (re...