We have remove Unity 3.13 from a ex5.5 site. This was ungraceful. The Unity folder and the old ex5.5 still exist in the ex site environment. There are no mailboxes on the Unity server. I can simply delete the exchange-Unity from the Ex site...How do I remove Unity folder nicely so there is no trace of Unity left in the ex site environment. In the past we used dohpropkill utility...what needs to be done in 3.x environment<br><br>Sean Poure<br>NEC-Voice Engineering<br>Sr. Aplication Engineer<br>714 4846275<br>
What you need to do it open the Exchange Administrator (admin.exe) in raw mode with the /r switch. You then will want to delete the raw object for the orphaned Unity server and the Unity folder. If the customer wants to introduce Unity again they will need to make sure that the 'voice-mail-user-ID' property is set to 0 on all of the subscribers too.
Keith Chambers Diagnostic Engineer Voice Network Team, San Jose Cisco Systems, Inc.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...