05-14-2002 06:06 AM - edited 03-12-2019 06:48 PM
I would like to intergrate a Unity 2.4.6 with a Callmanager 3.1 but in the "edit switch utility" a can select 2.4 only with Serial intergration, but can't change the IP address for the Callmanager intergration...<br>When I select Callmanager 3.0 there appears nothing on the integration.<br><br>
05-14-2002 07:18 AM
The IP address for the Call Manager integration is changed in the Telephony (or Phone and Modems) control panel applet. See the TSP release notes here...
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/tsp/index.htm
What type of integration is listd on the security key?
Steve Olivier
Software Engineer
Cisco Systems
05-15-2002 04:35 AM
I followed the release notes ...The intergration is a Unity 2.4.6 on a WIndows NT SP6A, with exchange 5.5 to intergrate with a callmanager 3.1.
What do you mean with security key ???
05-15-2002 08:46 AM
security key in this case refers to your dongle programming. You can check it with KeyDump in the Unity folder on the start menu.
The switch file isn't a tremendous factor in CCM integration as it is in a PBX scenario ... most of the heavy stuff is in the TSP.
Scott Morgan
Cisco Systems TAC
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide