Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

EFXS_INIT - what is the definition of this state?

Hi All

I have done a show voice call summary on a customer's router that is running SRST. The customer swears blined that all the phones are registered to the CallManager. However, I get the following output:

oxford-rtr-voip#Show voice call summary

PORT CODEC VAD VTSP STATE VPM STATE

============== ======== === ==================== ======================

0/1/0.1 - - -

0/1/0.2 - - -

0/1/1.1 - - -

0/1/1.2 - - -

50/0/1 .1 - - - EFXS_ONHOOK

50/0/2 .1 - - - EFXS_ONHOOK

50/0/3 .1 - - - EFXS_INIT

50/0/4 .1 - - - EFXS_INIT

50/0/5 .1 - - - EFXS_INIT

50/0/6 .1 - - - EFXS_INIT

50/0/7 .1 - - - EFXS_INIT

50/0/8 .1 - - - EFXS_INIT

50/0/9 .1 - - - EFXS_INIT

50/0/10 .1 - - - EFXS_INIT

50/0/11 .1 - - - EFXS_INIT

50/0/12 .1 - - - EFXS_INIT

50/0/13 .1 - - - EFXS_INIT

50/0/14 .1 - - - EFXS_INIT

50/0/15 .1 - - - EFXS_INIT

50/0/16 .1 - - - EFXS_INIT

50/0/17 .1 - - - EFXS_INIT

50/0/18 .1 - - - EFXS_INIT

50/0/19 .1 - - - EFXS_INIT

50/0/20 .1 - - - EFXS_INIT

My query is twofold:

1) Does the EFXS_ONHOOK not mean that the ephone is registered to the SRST device and is ready to make/receive calls (i.e. the dial peer is ready to rumble)?

2) What on earth does EFXS_INIT mean?

My gues on the later would be it is in the initialising state, but cannot find any confirmation anywhere on the CCO to that effect!

Anyone got any clues, please let me know.

Rgds

Marc

1 REPLY
Silver

Re: EFXS_INIT - what is the definition of this state?

Upgrade to 12.2(15)T11 to work around this issue or latest IOS in 12.3 maniline.

1239
Views
0
Helpful
1
Replies