10-20-2006 02:35 AM - edited 03-13-2019 03:27 PM
Hi All
I have done a show voice call summary on a customer's router that is running SRST. The customer swears blined that all the phones are registered to the CallManager. However, I get the following output:
oxford-rtr-voip#Show voice call summary
PORT CODEC VAD VTSP STATE VPM STATE
============== ======== === ==================== ======================
0/1/0.1 - - -
0/1/0.2 - - -
0/1/1.1 - - -
0/1/1.2 - - -
50/0/1 .1 - - - EFXS_ONHOOK
50/0/2 .1 - - - EFXS_ONHOOK
50/0/3 .1 - - - EFXS_INIT
50/0/4 .1 - - - EFXS_INIT
50/0/5 .1 - - - EFXS_INIT
50/0/6 .1 - - - EFXS_INIT
50/0/7 .1 - - - EFXS_INIT
50/0/8 .1 - - - EFXS_INIT
50/0/9 .1 - - - EFXS_INIT
50/0/10 .1 - - - EFXS_INIT
50/0/11 .1 - - - EFXS_INIT
50/0/12 .1 - - - EFXS_INIT
50/0/13 .1 - - - EFXS_INIT
50/0/14 .1 - - - EFXS_INIT
50/0/15 .1 - - - EFXS_INIT
50/0/16 .1 - - - EFXS_INIT
50/0/17 .1 - - - EFXS_INIT
50/0/18 .1 - - - EFXS_INIT
50/0/19 .1 - - - EFXS_INIT
50/0/20 .1 - - - EFXS_INIT
My query is twofold:
1) Does the EFXS_ONHOOK not mean that the ephone is registered to the SRST device and is ready to make/receive calls (i.e. the dial peer is ready to rumble)?
2) What on earth does EFXS_INIT mean?
My gues on the later would be it is in the initialising state, but cannot find any confirmation anywhere on the CCO to that effect!
Anyone got any clues, please let me know.
Rgds
Marc
10-26-2006 06:03 AM
Upgrade to 12.2(15)T11 to work around this issue or latest IOS in 12.3 maniline.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide