Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Emergency Responder question

I am setting up Emergency Responder - publisher only. If I set up 911 calls to route to ER and for whatever reason if ER fails can I create an alternate route point on my Callmanager 3.3.3 servers to go ahead and route the 911 call? Has anyone tested this scenario?

Thanks in advance..

1 REPLY
Bronze

Re: Emergency Responder question

Take a look at:

http://www.cisco.com/univercd/cc/td/doc/product/voice/respond/res12/admin12/e911ccm.htm#1061117

"Table 3-1 Emergency Call Route Points"

You can see that there is a 2nd CER server in case the first fails, and the failover is simply configuring the CFB,CFNA,CFOF numbers to point to 912, which is the 2nd CER server.

You could simply change this to 9911, or whatever, and make sure the CSS of the CFB,CFNA,CFOF does not include the partition of the 911 CTI RP (otherwise it will loop).

86
Views
0
Helpful
1
Replies
CreatePlease to create content