Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Encounter Input Error at Serial Interface :15

Hi All,

I having a AS5300 connected to a ISDN PRI E1, but when i start sending voice calls into the AS5300, alot of call cant connect, i have did a sh Int serial 2:15 and find that there is input error.

Can anyone help me to solve this problem?

here is the info from the GW

Serial2:15 is up, line protocol is up (spoofing)

Hardware is DSX1

MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,

reliability 128/255, txload 1/255, rxload 1/255

Encapsulation HDLC, loopback not set

Last input 00:00:00, output never, output hang never

Last clearing of "show interface" counters 04:46:55

Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: weighted fair

Output queue: 0/1000/64/0 (size/max total/threshold/drops)

Conversations 0/1/256 (active/max active/max total)

Reserved Conversations 0/0 (allocated/max allocated)

Available Bandwidth 48 kilobits/sec

5 minute input rate 0 bits/sec, 9 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

157983 packets input, 1271719 bytes, 0 no buffer

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

157974 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 157974 abort

158162 packets output, 1770073 bytes, 0 underruns

0 output errors, 0 collisions, 0 interface resets

0 output buffer failures, 0 output buffers swapped out

0 carrier transitions

Timeslot(s) Used:16, Transmitter delay is 0 flags

1 REPLY
Bronze

Re: Encounter Input Error at Serial Interface :15

The link is very impure, so you have to check the link quality.

78
Views
0
Helpful
1
Replies
CreatePlease to create content