Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
You may experience some slow load times, errors, and slight inconsistencies. We ask for your patience as we finalize the launch. Thank you.

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Ericson MD110 integration

We are doing a dual integration with an Ericson md110 - we have purchased a

UNITY-SVR7837-1A= (compaq 7837) server and a single D/120JCT Universal PCI Euro card. Do we need to order an expansion chassis for the server platform? Also what type of cables do we require and do Cisco provide them?

thanks

Jeff

  • Other Collaboration Voice and Video Subjects
1 REPLY
Cisco Employee

Re: Ericson MD110 integration

That server is documented as having "1 slot available for voice boards" Here's a link to that page...

http://www.cisco.com/warp/public/cc/pd/unco/un/prodlit/ucutp_st.htm

The Voice board/ PBX integration compatibility list is here...

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/sysreq/31_sysrq.htm#51100

There really shouldn't be any need for special cables for the voice boards. Here's some information on how the D/120 is "pin'd out"...

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/unity30/inst/inst301/inst_a.htm#xtocid98763

The requirements including cables for that integration are listed here...

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/unity30/integuid/ericseri/itermdse.htm#30156

If you don't want anymore than 12 ports, and the slot for the voice board is free, it looks like the expansion chassis is not necessary.

106
Views
0
Helpful
1
Replies