Ericson MD110 integration

[jeff.singh_2]

We are doing a dual integration with an Ericson md110 - we have purchased a

UNITY-SVR7837-1A= (compaq 7837) server and a single D/120JCT Universal PCI Euro card. Do we need to order an expansion chassis for the server platform? Also what type of cables do we require and do Cisco provide them?

thanks

Jeff

[oliviers]

That server is documented as having "1 slot available for voice boards" Here's a link to that page...

http://www.cisco.com/warp/public/cc/pd/unco/un/prodlit/ucutp_st.htm

The Voice board/ PBX integration compatibility list is here...

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/sysreq/31_sysrq.htm#51100

There really shouldn't be any need for special cables for the voice boards. Here's some information on how the D/120 is "pin'd out"...

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/unity30/inst/inst301/inst_a.htm#xtocid98763

The requirements including cables for that integration are listed here...

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/unity30/integuid/ericseri/itermdse.htm#30156

If you don't want anymore than 12 ports, and the slot for the voice board is free, it looks like the expansion chassis is not necessary.