Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Ericsson BP250 and CCME 3.4 (H323)

Hi All

I have been trying to connect an Ericsson BP250 via an IPU card to a Cisco Callmanager Express router by using H323 trunks. So far calls can be made both ways successfully, however I am having issues with call forwarding at call transfer between the systems. Has anyone else attempted this? Or prehaps some ideas? Thanks Ross

3 REPLIES
Bronze

Re: Ericsson BP250 and CCME 3.4 (H323)

Hi Ross

Our organisation has a Call Manager cluster with a number of BP250 systems with IPU and Licensing. I am not really up with Ericsson and the BMS documentation is not exactly straight forward. Do you have any available documentation you are able to provide for the Ericsson side config, this would be greatly appreciated. I do have a test BP250 along with Call Manager and Call Manager express as I would like to have a fully functional system.

Thanks

Heath

New Member

Re: Ericsson BP250 and CCME 3.4 (H323)

Hi

I don`t have any documentation, I am currently trying to source some from the PABX engineers. If I find anything I`ll let you know.

Later

Ross

New Member

Re: Ericsson BP250 and CCME 3.4 (H323)

Hi,

Please I need to know if you have a ring issue. Actually I am in the same situation, I have call forward issue, and I have also a ring issue when an analog phone in the BP250 side calls an IP phone in the CCME side this former doesn't hear the ringing signal

If you have an idea around that please advise

thanks,

Hamdi

906
Views
0
Helpful
3
Replies
CreatePlease login to create content