Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Super Bronze

Error on BRI network-side Q921...

Hi All

I've some VC equipment connected to an EVM BRI module, configured as network-side.

I'm looking into a problem with it for a customer but noticed this error on debug q921 - i don't think this is causing their main problem, but wondered if anyone knew what it means?

8:59.877: ISDN BR2/1 Q921: Net TX -> IDASSN ri=18041 ai=64

Nov 28 15:49:15.841: ISDN BR2/1 Q921: Net RX <- IDREQ ri=21781 ai=127

Nov 28 15:49:15.845: ISDN BR2/1 Q921: Net TX -> IDASSN ri=21781 ai=65

Nov 28 15:49:34.365: ISDN BR2/1 Q921: Net RX <- IDREQ ri=21781 ai=127

Nov 28 15:49:34.365: ISDN BR2/1 **ERROR**: LM_AssignTei: Superfluous ID REQUESTS. Remove all TEIs

Nov 28 15:49:34.365: ISDN BR2/1 Q921: Net TX -> IDDENY ri=21781 ai=127

Nov 28 15:49:34.365: ISDN BR2/1 Q921: Net TX -> IDCKRQ ri=0 ai=64

Nov 28 15:49:34.365: ISDN BR2/1 Q921: Net TX -> IDCKRQ ri=0 ai=65

Nov 28 15:49:35.365: ISDN BR2/1 Q921: Net TX -> IDCKRQ ri=0 ai=64

Nov 28 15:49:35.365: ISDN BR2/1 Q921: Net TX -> IDCKRQ ri=0 ai=65

Nov 28 15:49:36.205: ISDN BR2/1 Q921: Net RX <- IDREQ ri=36697 ai=127

Nov 28 15:49:36.205: ISDN BR2/1 **ERROR**: LM_AssignTei: Superfluous ID REQUESTS. Remove all TEIs

Nov 28 15:49:36.209: ISDN BR2/1 Q921: Net TX -> IDDENY ri=36697 ai=127

Nov 28 15:49:36.365: ISDN BR2/1 Q931: Ux_DLRelInd: DL_REL_IND received from L2

Nov 28 15:49:36.365: ISDN BR2/1 Q931: Ux_DLRelInd: DL_REL_IND received from L2

Nov 28 15:49:38.145: ISDN BR2/1 Q921: Net RX <- IDREQ ri=27237 ai=127

Nov 28 15:49:38.145: ISDN BR2/1 Q921: Net TX -> IDASSN ri=27237 ai=64

Is it something to do with the way my tei-negotiation is set up or something?

Thanks

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
2 REPLIES

Re: Error on BRI network-side Q921...

Hi

This link deals with troubleshooting Q921 messages i feel it may help u out ...

http://www.cisco.com/en/US/tech/tk801/tk379/technologies_tech_note09186a0080094b77.shtml

regds

New Member

Error on BRI network-side Q921...

Hi Aaron Harrison,

i hope you have fix your issue in the meanwhile ;-)

if not, i have a Problem with the same Q921 Output.

My Workaround for this issue was to configure a static tei at the BRI Interface.

I hope this can be a help for anyone how dealing with some kind of issue.

regards

Dominik

1042
Views
0
Helpful
2
Replies
CreatePlease login to create content