07-24-2001 08:51 AM - edited 03-12-2019 12:02 PM
Hi! We installed Unity and all works fine except the fact that Unity is creating many files on the C root(C:\AvSecurityKeyxxxx.log).
Here are the entries in one of the files:
[114c][c64][00:00:00:718]CAvKeyCache::RefreshCache FindFirstUnit failed with rc= 0x00000003
[114c][c64][00:00:02:921]CAvKeyCache::RefreshCache FindFirstUnit failed with rc= 0x00000003
[114c][c64][00:00:03:140]CAvKeyCache::RefreshCache FindFirstUnit failed with rc= 0x00000003
[114c][c64][00:00:03:375]CAvKeyCache::RefreshCache FindFirstUnit failed with rc= 0x00000003
[114c][c64][00:00:05:640]CAvKeyCache::RefreshCache FindFirstUnit failed with rc= 0x00000003
Does anyone knows why these files are created?!
Thanks in advance,
Michel Nantel
07-27-2001 08:53 PM
Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.
07-30-2001 02:29 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide