Errors on Unity 2.4.6

[pepsiflat]

Hi! We installed Unity and all works fine except the fact that Unity is creating many files on the C root(C:\AvSecurityKeyxxxx.log).

Here are the entries in one of the files:

[114c][c64][00:00:00:718]CAvKeyCache::RefreshCache FindFirstUnit failed with rc= 0x00000003

[114c][c64][00:00:02:921]CAvKeyCache::RefreshCache FindFirstUnit failed with rc= 0x00000003

[114c][c64][00:00:03:140]CAvKeyCache::RefreshCache FindFirstUnit failed with rc= 0x00000003

[114c][c64][00:00:03:375]CAvKeyCache::RefreshCache FindFirstUnit failed with rc= 0x00000003

[114c][c64][00:00:05:640]CAvKeyCache::RefreshCache FindFirstUnit failed with rc= 0x00000003

Does anyone knows why these files are created?!

Thanks in advance,

Michel Nantel

mnantel@gt.ca

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

[cbuckingham]

Try the Unity Forum.

There is a link from: www.answermonkey.net

Chris