I have a customer who needs to expand an existing system which is running 3.1 CM and has several 3rd part apps and Unified messaging etc. They are now wanting to expand the system with more phones and need an additional server. The problem is that CM 3.1 is not orderable. I have been told by Cisco that they will allow me to use 3.1 although I order 3.3 .
However does anyone at Cisco know if there will be a version of CM 3.1 CD's which will support the newer build servers.
I would suggest you to upgrade the existing Call managers to 3.3 and order a new 3.3 for expansion. This would solve the problem. Or if you want to retain the existing callmanager to 3.1 you could as well do it as there should not be any compatibility issues if you would add a CM 3.3 to it.
Easy top say, Not so easy to do. All the customer wants is some more phones on an existing cluster. Unfortunatly they need to expand to an additional server. Upgrade will involve 3rd party apps and IPCC. It is using a sledgehammer to crack a nut!!!
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...