There is not really a way to do this at this time that I am aware of. I would suggest adding the users to the lab systems using BAT then when you move to the production system you can just use the same BAT template.
If you are talking about the Global Directory, You might want to try the DC Directory export. I have not tried this personally myself but It might get the job done. You will have to either setup replication or export the data to a csv file.
You can try this is you want, but to my knowledge you will not get any support from Cisco if you try this operation. We don't support you doing it like this so if you decide to you will be proceeding at your own risk.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...