i've configured my callmanager 4.1(3) with extension mobility features.
I've a problem:
when a user login on a phone, he can load his profile correctly (for example ext.900) , but when i call that extension (900) from another phone, the phone ring out after 15 seconds...i don't think it is a normal behaviour.
CallManager collects digits, it attempts to match route patterns in the database. Interdigit timeout occurs when the closest matched route pattern has a number of possible digit-string matches. Cisco CallManager has the interdigit timer set to 15 seconds by default.
just go to Route Plan > Route Plan Report, and remove/alter (pattern,line DN,VM port DN, pickup group DN, pilot points DN,....etc ) that causes this possible match, possible match may looks like 900X
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...