Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Extension Mobility with CME 7.1

Hello,

 

I configured the EM for CME 7.1. The router is 2811 with version 124-24.T4 I activate the http server.

When i type the service button on the IP phone, I got "service not configured". Do you have an idea? Could it be a wrong path to folder GUI?

Thanks

JB

---------------------------------------------------

voice logout-profile 1
 number 1001 type normal
 speed-dial 1 0 label "Plse logon with your GGI profile"
 

voice user-profile 1
 user barrack password obama
 number 1011 type normal

ephone-dn  1  dual-line
 number 1001 no-reg primary

ephone-dn  11  dual-line
 number 1011 no-reg primary
 label Barrack OBAMA
 description 607691011
 name Barrack OBAMA

ephone  1
 mac-address 0021.5502.E6B7
 type 7965
 logout-profile 1

 

telephony-service
 sdspfarm units 1
 sdspfarm transcode sessions 128
 sdspfarm tag 1 conference
 conference hardware
 authentication credential Total Total
 em keep-history
 em logout 0:0 0:0 0:0
 max-ephones 30
 max-dn 20
 ip source-address 10.192.255.158 port 2000
 service phone daysBacklightNotActive 1,2,3,4,5,6,7
 service phone backlightOnTime 07:30
 service phone backlightOnDuration 00:01
 service phone backlightIdleTimeout 00:01
 service phone daysDisplayNotActive 1,2,3,4,5,6,7
 service phone settingsAccess 1
 service phone displayOnWhenIncomingCall 1
 service phone webAccess 0
 service phone spanToPCPort 0
 url services http://10.57.37.155/telephony_service.html
 url authentication http://10.57.37.155/CCMCIP/authenticate.asp
 user-locale PT
 network-locale FR
 load 7906 term06.default.loads
 load 7942 term42.default.loads
 load 7945 SCCP45.9-3-1SR2-1S
 load 7965 SCCP45.9-3-1SR2-1S
 time-zone 23
 time-format 24
 date-format dd-mm-yy
 max-conferences 2 gain -6
 moh music-on-hold.au
 multicast moh 239.10.16.4 port 16384 route 10.192.255.157
 web admin system name admin secret 5 $1$a1E5$R3NPE52tm67KlhEh6S.2U/
 dn-webedit
 time-webedit
 transfer-system full-consult
 secondary-dialtone 9
 create cnf-files version-stamp 7960 Aug 13 2014 14:09:54
 

------------------------------

 

 

1 REPLY
Cisco Employee

Hi Jean,I see that the ip

Hi Jean,

I see that the ip address of your CME is "10.192.255.158". Can your change the ip address under :

 url services http://10.57.37.155/telephony_service.html
 url authentication http://10.57.37.155/CCMCIP/authenticate.asp

..to..

10.192.255.158

Make sure you have http enabled. You should see "ip http server" in your running config.

Do a no create/create cnf under telephony-service and reset the phone. You should be good.

Let me know if you face any issues after this.

 

HTH,

Nipun.

58
Views
0
Helpful
1
Replies
CreatePlease login to create content