customer has call mgr 3.2(2c) with extension mobility. They can log into and out of a phone fine. The next time they try it, the phone reboots itself. Does anyone have any idea as to why the phone is intermittently rebooting when a login is initiated?
Phone was rebooting because the user profile was not configured for expansion modules while the device was. Once I changed all the user profiles to have exp. modules, the phone no longer rebooted after login or logout.
If templates are different between the device and the user profile, phone will reboot.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...