Extension on VG248 gives warbly double attempt before real dial tone
Analog line on VG248 for fax. Fax machine died. Checked dial tone and fax machine. Fax machine was indeed faulty. But dial tone was weird when checked with regular analog phone. Gives two initial warbly false starts and then gives real dial tone. [Not a real stutter like old systems did to anounce message waiting.] Went straight to the closet and tested at the punch down. Same thing. Deleted the directory number in CCM and the VG248, re-added to a different port on a different VG248 terminating at different punchdown block. Same thing! Appears to be setup the same as all the other VG248 ports used for faxes. Once dial tone is supplied outbound calls can be placed!
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...