I get through the first part of the install where it asks you to restart the server. I also get all the way through the second part of the install, but at the tail end, I get an error while "starting Unity services" <br>The intall fails with the error "Failed to start one or more services"<br>When i look at the Av services I see that everything is started except avcsmgr (manual/localsystem) and Avadunity Manual /local system<br>Any ideas?<br>Thanks<br><br>
In the application event log you should see a series of create/init/run references for each Unity component as it goes through the startup process. Somewhere along the line you'll see at least one error in this process that should give us a clue as to where things are tripping up and why.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...