i have a 3845 gateway added as h323 gateway on CUCM 8.
we i try to make an outbound call .
The system cannot complete the call.
"Your call cannot be completed as dialedPlease consult your directory and call again or ask your operator for assistance "
when i opend a debug h245 on the GW i get the below output .
023334: *Apr 12 13:08:55.918: %C3800_ENVM-3-MFAIL_OFF: There is more than one fa ilure with the Power System 2 or this Power System has been turned off. 023335: *Apr 12 13:09:15.918: %C3800_ENVM-3-MFAIL_OFF: There is more than one fa ilure with the Power System 2 or this Power System has been turned off. 023336: *Apr 12 13:09:33.906: h323chan_chn_process_read_socket: fd=0 of type LIS TENING has data
023337: *Apr 12 13:09:33.906: Changing to new event: ACCEPT h323chan_chn_accept: fd=0
023338: *Apr 12 13:09:33.906: h323chan_gw_accept: TCP connection accepted from 1 126.96.36.199:40444 on fd=2 023339: *Apr 12 13:09:33.906: h323chan_chn_accept: Local(0x0) accepts TCP conn f rom 172.19.0.141(0xAC13008D) port (40444); fd=2changing from LISTENING state to ACCEPTED state
023340: *Apr 12 13:09:33.926: h323chan_chn_process_read_socket: fd=2 of type ACC EPTED has data
023341: *Apr 12 13:09:33.930: h323chan_close: TCP connection from fd=2 closed 023342: *Apr 12 13:09:35.918: %C3800_ENVM-3-MFAIL_OFF: There is more than one fa ilure with the Power System 2 or this Power System has been turned off.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.