I am using CCME , i have configure internalional and national dialing and i can easily dial international calls by my ip phones .i have configure a login option when user login in phone he or she able to dial inernational calls but without login he/she can only dial national/local calls. i am facing a probem with my FAx machine which is connected to ATA device . with Fax machine i can send fax nationally/locally but cannot send fax internationally. and i didnt found any option in fax for login as we have in ip phones. please let me help what i am doing wrong.
some of the configuration are below i have try with removing pin command in ephone 68 but same problem.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...