Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Fax on H323 recive error

Hello

My Fax received work fine the tcl script is working and the faxes go directly to the Email Address

On the mail server (Ms Exchange)

For some fax machine when thy dial with 9 for out side line (with out a Pause ), or faxes from out of the country (when they had to have a long number) , the Fax hung and send back an error received !

When I’ve try to narrow the problem and add a pause before my 7 digit destination number it work fine

What I’m asking is a way to add some Pause before the number ? , Or some kind of parameter for the TCL Script that would help it to except the long number !!

Here is a brief of the conf :

dial-peer voice 30 pots

application on-ramp

incoming called-number 68930[0-2]1

direct-inward-dial

!

dial-peer voice 42 mmoip

application fax_on_vfc_onramp_app out-bound

destination-pattern 6893021

information-type fax

session target mailto:pglfax@nta.com

The Router Ver :

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-IS-M), Version 12.2(11)T6, RELEASE SOFTWARE (fc1

)

Compiled Fri 14-Feb-03 05:22 by ccai

Image text-base: 0x8000809C, data-base: 0x81673EB0

ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)

System image file is "flash:c2600-is-mz.122-11.T6.bin"

cisco 2621XM (MPC860P) processor (revision 0x100) with 59392K/6144K bytes of mem

ory.

Processor board ID JAD07100M2N (4263460570)

M860 processor: part number 5, mask 2

Channelized E1, Version 1.0.

Bridging software.

X.25 software, Version 3.0.0.

Primary Rate ISDN software, Version 1.1.

2 FastEthernet/IEEE 802.3 interface(s)

31 Serial network interface(s)

1 Channelized E1/PRI port(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Thanks in advance

Ofer

4 REPLIES
New Member

Re: Fax on H323 recive error

Hi,

You can add a "," in the dial peer for the pause...each "," will add one second pause

Please check this URL for more information

http://www.cisco.com/en/US/partner/products/hw/routers/ps1904/products_command_reference_chapter09186a008007dbad.html

New Member

Re: Fax on H323 recive error

Thanks

adding a " ' " befor the dest' or income make the number un rich so I've check it and drop it after

any other sug.

Ofer

New Member

Re: Fax on H323 recive error

You have mentioned "'" instead of ","....can you check once again..

New Member

Re: Fax on H323 recive error

miss-spalening error :)

i.m. ","

ofer

112
Views
0
Helpful
4
Replies
CreatePlease to create content