I have tried that IOS version on the VG200with the command:
mgcp modem passthrough voip mode cisco
Does this command prevent fax-relay from being used?
Still have problems with port lockups on the FXS ports. No dialtone from the device. Fast-busy when called from an IP phone. I have a doc from CEC which states that the functionality is not provided until 12.2(2)XN, for which the release date keeps slipping. If the fax machines being used request fax-relay, would the mgcp command have the effect of forcing a passthrough connection?
FXS ports are used to connect end devices like phones or fax-machines. If you mean you have a fax connected to a FXS port on a VG200, then across a LAN or WAN you have a 1750 with an FXS port with a connected FAX, then yes. Need more details about the problem in order to help...
According to TAC, Faxing with mgcp on the VG200 is not supported until 12.2(2)XN which has yet to be released. Hopefully it will be released soon, the date has slipped several times. Until then, H.323 is the way to go. I have had very stable fax performance under H.323 on the VG200.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.