We have problems with fax transmission. The transmission is interupted when sending/recieving large fax.
As gateway we have a C2651 with AIM-Voice-30 board running MGCP and a ATA-186 (SCCP) connecting the fax machines. We have changed the fax transmission rate down to 9600 bps, but it doesn't help.
We have tried to make a 'forward all' at the directory number in CCM to an external number, but the problem still remains. So I think the problem is not in the ATA186 but probably in the C2651 gateway.
Someone who have any ideas about this issue?
How do I configure fax passthrough in the C2600 with MGCP?
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.