Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

FAX pstn-wan-pstn error

Hi all!

Im have this case:

PSTN -> (e1) -> router1 -> WAN -> router2 -> e1 -> PSTN

im using this for cost purpose, i redirect a fax call to a "external voice-mail fax".

I tried to create a dial-peer voip gateway to gateway but didnt work.

lets me show the config of router1.

!

voice class codec 2

codec preference 1 g711ulaw

!

!

!

voice class h323 1

h225 timeout tcp establish 5

!

!

voice translation-rule 6925

rule 1 /^6925/ /028452546/

!

!

voice translation-profile FAX-CT

translate called 6925

!

dial-peer voice 69251 voip

translation-profile outgoing FAX-CT

destination-pattern 6925

voice-class codec 2

voice-class h323 1

session target ipv4:10.111.8.7

dtmf-relay h245-alphanumeric

!

Ip of router2 is 10.111.8.7

When i call to 6925, i hear the fax ringback ( because 028452546 answer the call ) but error occurs.

I see the call (on #show call active voice brief) that does on g711ulaw

Guilherme Henrique Villarinho www.avvid.net
1 ACCEPTED SOLUTION

Accepted Solutions

Re: FAX pstn-wan-pstn error

Add this to your configuration:

voice service voip

modem passthrough nse codec g711ulaw

I think this will help.

-nick

3 REPLIES

Re: FAX pstn-wan-pstn error

Add this to your configuration:

voice service voip

modem passthrough nse codec g711ulaw

I think this will help.

-nick

Re: FAX pstn-wan-pstn error

Thanks for your help, i will apply and test.

if works, i will rate your post.

Guilherme Henrique Villarinho www.avvid.net

Re: FAX pstn-wan-pstn error

This solve my problem, thank you

Guilherme Henrique Villarinho www.avvid.net
194
Views
0
Helpful
3
Replies