We have a Lightning Fax Server interfaced to a CallManager from a 6608 PRI interface. The PRI is configured as 5ESS on the dialogic board on the Lightning Fax. What do you suggest as the proper PRI config for the protocol on the CallManager PRI for this interface. The options would appear to be [5E9, 5E8, 5E8 Custom,]?
We are having intermittent success on faxes successfully reaching this server. They are either successful, or they do not connect successfully and simply terminate the call. The inbound PRI's for local and long distance are configured as NI2 with their respective carriers.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...