Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Flashing MWI with a Push or AXL

I'm try to flash the MWI of a phone with a push "Execute" or a AXL. How can I do it ?

  • Other Collaboration Voice and Video Subjects

Re: Flashing MWI with a Push or AXL

MWI is really VERY simple: you simply call the mwi on or mwi off extension sourced from the DN of the primary line on the phone. For example, to set the mwi on a phone with the primary extension of 2001 by using the mwi on extension of 7001, simply call 7001 with a CLID of 2001. The easiest test of this is to pick up the phone and call the mwi on or mwi off extension which sets the light. Really quite simple. Not sure what you mean by 'push', but mwi by definition is pushed to the phone. Not sure what you mean by AXL, but almost all programming languages that have VoIP extensions could do this. BTW, this is how MWI light setting has been done for 20 years on almost all key systems, pbx's, and voicemail systems.

Hope this helps...

This widget could not be displayed.