Have a look at example 3.3 in the XML developer doc.. it's a menu using absolute urls in the menuitems and queryitems in the button uris. The documentation says if you press a numeric button now, the menuitem is just selected. I'm currently at home working with the IPC but I can tell you that ain't so.. the IPC makes the request without appending my QueryItem and thus crashing the app. So I have to use the up/down buttons to navigate to the proper menuitem, then press the appropriate softkey, and then it work.
Just thought I'd let you know.. one of the little inconsistencies that makes our life harder.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...