FTP VG248 Image

[mwheinz]

What is the procedure to FTP an image into a VG248? Is it simply, 1. FTP to the IP of the VG248 and then, 2. use the "PUT" command followed by the filename? What next? I have to do about 25 of these and sure would appreciate a link or some DETAILED instructions.

Thanks in advance.

[gary.shaw]

Yes thats exactly what you need to do, obviously make sure you change the transfer to Binary first instead of Ascii.

Its here in the software config guide:-

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_access/apg/vg248/v1_0/soft_con/vg248swt.htm